Eaton Logo

Can I bring pulses from a gas meter into the PXM 2000?

Yes, if the optional I/O card is installed in the meter. Depending on the I/O card installed, you can have either 2 (for example 2 relay output/2 status input card) or 4 (4 KYZ pulse out/4 status input card) status inputs that can be used to accumulate pulses from the gas meter.
These accumulations are shown on the meter's embedded web page interface.  Contact your local Eaton Power Xpert Application Engineer (PXAE) if pulse metering data is required over Modbus.